TERRA-M
EUR 249.00


Linux embedded board for fast prototyping

TERRA is a carrier board conceived both to evaluate the Aria G25 SoM and to make prototypes or small production batches of OEM equipments using the Daisy cabling system.

The TERRA-M variation is equiped with a GSM/GPRS Quectel M95 quad band modem, a SIM holder and a SMA connector for an external GSM antenna.

| Product description | Terra catalog |

TERRA
EUR 169.00


Linux embedded board for fast prototyping

TERRA is a carrier board conceived both to evaluate the Aria G25 SoM and to make prototypes or small production batches of OEM equipments using the Daisy cabling system.

| Product description | Terra catalog |

COMBO-T1
EUR 199.00


Basic TERRA board kit

Basic kit to evaluate the Aria G25 SoM or to develop applications with TERRA board SBC.

Parts included:

  • One TERRA board (Code TERRA)
  • A bootable microSD with Debian Linux preinstalled
  • One Debug port interface (Code DPI)
  • One USB data cable for DPI
  • One wall adapter 12 volt @ 2A switching power supply (Code PS12V2A-EU)

| Product description | Terra catalog |

COMBO-T2
EUR 239.00


Enhanced TERRA board kit

Enhanced kit to evaluate the Aria G25 SoM or to develop applications on TERRA board SBC.

Parts included:

  • One TERRA Board (Code TERRA)
  • A bootable microSD with Debian Linux preinstalled
  • One Debug port interface (Code DPI)
  • One USB data cable for DPI
  • One wall adapter 12 volt @ 2A switching power supply (Code PS12V2A-EU)
  • One Teko Tekal enclosure
  • One Daisy-24 lcd module
  • One Lithium battery model CR1220 at 3 volt for RTC circuitry (Code CH23-1220)

| Product description | Terra catalog |

COMBO-M1
EUR 279.00


Basic TERRA-M board kit (GSM/GPRS)

Basic kit to evaluate the Aria G25 SoM or to develop applications on TERRA-M board SBC.

Parts included:

  • One TERRA-M board (Code TERRA) incluted a Quectel M95 GSM module
  • A bootable microSD with Debian Linux preinstalled
  • One Debug port interface (Code DPI)
  • One USB data cable for DPI
  • One wall adapter 12 volt @ 2A switching power supply (Code PS12V2A-EU)
  • GSM antenna with 2 mt cable

| Product description | Terra catalog |

COMBO-M2
EUR 319.00


Enhanced TERRA-M board kit (GSM/GPRS)

Enhanced kit to evaluate the Aria G25 SoM or to develop applications on TERRA-M board SBC.

Parts included:

  • One TERRA-M Board (Code TERRA)
  • A bootable microSD with Debian Linux preinstalled
  • One Debug port interface (Code DPI)
  • One USB data cable for DPI
  • One wall adapter 12 volt @ 2A switching power supply (Code PS12V2A-EU)
  • One Teko Tekal enclosure
  • One Daisy-24 lcd module
  • One Lithium battery model CR1220 at 3 volt for RTC circuitry (Code CH23-1220)
  • GSM antenna with 2 mt cable

| Product description | Terra catalog

TERRACASE
EUR 28.00


Teko enclosure for Terra Board

Alluminium and ABS enclosure for TERRA and TERRA-M board.

PS12V2A-EU
EUR 15.00


Switching wall mount power supply for TERRA Board

Switching wall mount power supply 12V 2A with european plug for TERRA Board

AN-GSM-RUBBER-SMA-M
EUR 6.00


GSM rubber antenna

GSM/GPRS Rubber Antenna for TERRA-M board or DAISY-31 M-Bus adapter.

Features:

  • Gain: 2dB
  • Antenna length: 50 mm
  • Connector: SMA R/A male
  • Frequency: 850/1900MHz or 900/1900MHz
  • Impedance: 50 Ohm

AN-GSM-CABLE-SMA-M
EUR 8.00


GSM 2m cable antenna

GSM/GPRS magnetic Antenna for TERRA-M board with cable.

Features:

  • Cable length: 2 meter
  • Antenna height: 105 mm
  • Connector: SMA R/A male
  • Frequency: 850/1900MHz or 900/1900MHz
  • Gain: 3dB

CH23-1220
EUR 3.00


3V Lithium battery

Lithium battery model CR1220 at 3 volt for RTC circuitry on:

FLAT-20CM
EUR 2.00


Flat cable 10 wires, 20 cm, pitch 1.27 mm

Ribbon cable for YARM-DEV or DAISY modules wiring:

  • Length 20 cm
  • 10 wires
  • Pitch 1.27 mm

DEBM8G-ARIA
EUR 12.00


Debian microSD 8GB for Aria-G25

Bootable 8GB microSD with a preinstalled Debian Linux distribution for Aria G25 board.

Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included.

| Product description |

DEBM16G-ARIA
EUR 16.00


Debian microSD 16GB for Aria-G25

Bootable 16GB microSD with a preinstalled Debian Linux distribution for Aria G25 board.

Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included.

| Product description |

DEBM32G-ARIA
EUR 22.00


Debian microSD 32GB for Aria-G25

Bootable 32GB microSD with a preinstalled Debian Linux distribution for Aria G25 board.

Please note that this card contains Open Source code under GPL licence and you are buying just the memory card not the software on it. Any rights on this software or support are not included.

| Product description |

DAISY-24
EUR 14.00


Alphanumeric I2C 16x2 LCD module + 4 push buttons

Daisy-24 mini alphanumeric I2C 16x2 characters LCD module with 4 push buttons. Usable as Terra Board front panel or as normal Daisy module for other board with Daisy connectors.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM). It is not needed if you plug it directly on a Terra board.

| Product description | Daisy catalog |

GPSANT
EUR 6.00


GPS active antenna

GPS active antenna with SMA male connector to use Daisy-7 add-on board.

DAISY-10
EUR 22.00


Daisy isolated RS485/422 module

DAISY-10 is an isolated RS485/RS422 interface.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |

DAISY-9
EUR 14.00


Daisy RS232 module

DAISY-9 is RS232 DTE serial interface, not optoisolated, with TXD, RXD, CTS and RTS signals.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |

DAISY-18
EUR 14.00


4 channel industrial range optoisolated input (0-48 volt)

DAISY-18 is an opto-isolated 0-48 volt 4ch input for industrial purposes.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description |

DAISY-19
EUR 14.00


4 channel industrial range optoisolated output (0-48 volt)

DAISY-19 is an opto-isolated 0-48 volt solid state 4ch switch for industrial purposes.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |

DAISY-20
EUR 8.00


4 ch 0-10 volt A/D interface

Front-end for the 4 channel A/D 10bits converter built-in the Atmel CPU.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |

DAISY-12
EUR 3.00


Prototyping board

DAISY-12 is a 40x40 mm prototyping board with daisy IDC connector mounted and small soldering area to create your custom daisy add-on module.

Note: the daisy flat cable to wire this board is not included. Don't forget to buy it (code FLAT-20CM)

| Product description | Daisy catalog |

FLAT-20CM
EUR 2.00


Flat cable 10 wires, 20 cm, pitch 1.27 mm

Ribbon cable for YARM-DEV or DAISY modules wiring:

  • Length 20 cm
  • 10 wires
  • Pitch 1.27 mm

IDC-FLAT
EUR 1.00


IDC socket 1.27mm for Daisy flat cable

IDC connector with 1.27mm spaced dual-row pin headers. The insulation displacement (IDC) contacts on these connectors allow them to be quickly and easily crimped onto FLAT-20CM flat ribbon cable for Daisy cabling system.

This female socket is designed to be connected to the male header on the Daisy modules. A polarizing tab in the middle ensures the correct orientation.

| Datasheet |

IDC-PCB
EUR 1.00


IDC header 5x2 pin pitch 1.27mm SMT

SMT IDC header 10 pin (5x2) pitch 1.27 mm

| Datasheet | Other parts |

FC-3754-1M
EUR 1.00


1 meter of 10 wires flat cable for Daisy wiring

1 meter of grey conductor flat cable, .025" pitch, 10 wires at 30 AWG, to use for Daisy wiring.

| 3M Datasheet |